Part Number Hot Search : 
8050M SE304 H6040 H0010 FDS6690S 227M0 LT1509 HE552
Product Description
Full Text Search
 

To Download SP6003S8TG Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 SP6003
Synchronous Rectifier Driver
DESCRIPTION The fundamental of SP6003 synchronous rectifier (SR) driver IC is based on our U.S. patented methods that utilize the principle of "prediction" logic circuit. The IC deliberates previous cycle timing to control the SR in present cycle by "predictive" algorithm that makes adjustments to the turn-off time, in order to achieve maximum efficiency and avoid cross-conduction at the same time. It also maintains the MOSFET's body diode conduction at minimum level. The SP6003 is capable to adapt in almost all existing flyback converters with few adjustments considered necessary. FEATURES * Offers efficiency improvement over Schottky Diode (depends on drive configuration of the SR). * * * * * Drives all logic level Power MOSFET. Prediction gate timing control. Minimum MOSFET body diode conduction. Operating frequency up to 350 KHz. Synchronize to transformer voltage waveform. secondary PART MARKING APPLICATIONS * Servers & workstations * * * * Storage area network power supplies Telecommunication converters Embedded systems Industrial & commercial systems using high current processors
PIN CONFIGURATION (SOP-8)
2006/03/28 Ver.3
Page 1
SP6003
Synchronous Rectifier Driver
TYPICAL APPLCATION CIRCUIT
PIN DESCRIPTION
Pin 1 2 3 4 5 6 7 8 Symbol Timing NC Rapid-Adj Cramp GND MOSG-C Vdd SYNC No connection. Capacitor connection to adjust fast pulse width reduction response. Ramp capacitor adjustment to extend MOSFET's gate timing. Ground connection. Catch MOSFET gate drive. DC supply voltage. Synchronized signal from transformer's output. Description Discontinuous current filter timing adjustment resistor connection.
2006/03/28 Ver.3
Page 2
SP6003
Synchronous Rectifier Driver
BLOCK DIAGRAM
ORDERING INFORMATION
Part Number SP6003S8RG SP6003S8TG SP6003S8RG : 7" Tape Reel ; Pb - Free SP6003S8TG : Tube ; Pb - Free Package SOP-8 SOP-8 Part Marking SP6003I SP6003I
ABSOULTE MAXIMUM RATINGS (TA=25, unless otherwise specified.)
The following ratings designate persistent limits beyond which damage to the device may occur.
Symbol Vdd SYNC IOUT PD TJ TSTG TLEAD
Parameter DC Supply Voltage SYNC Voltage Peak Source Current (Pulsed) Peak Sink Current (Pulsed) Power Dissipation @ TA=85 (*) Operating Junction Temperature Range Storage Temperature Range Lead Soldering Temperature for 5 sec.
Value 7 7.5 1 1.5 0.25 -40 to 150 -40 to 150 260
Unit V V A A W
2006/03/28 Ver.3
Page 3
SP6003
Synchronous Rectifier Driver
THERMAL RESISTANCE
Symbol RJC Parameter Thermal Resistance Junction - Case (*) Value 45 Unit /W
(*) The power dissipation and thermal resistance are evaluated under copper board mounted with free air conditions.
ELECTRICAL CHARACTERISTICS
(TA=25, Vdd=5V, VSYNC=5V, Freq. =300 KHz, Duty Cycle=50%, unless otherwise specified.)
Symbol
Parameter
No load
Conditions
Min.
4 3.8 3.9
Typ.
5.5 5.0 4.1 5.0 0.9 4.9 0.1 20 28 23
Max.
8 7.0
Unit
mA V V V V V V ns ns ns
SUPPLY INPUT IDD Supply current Vonth Vdd turn on threshold Voffth Vdd turn off threshold SYNC REFERENCE (SYNC) Vshth SYNC high threshold Vslth SYNC low threshold MOSFET GATE DRIVER (MOSG-C) Voh Output high voltage Vol Output low voltage Td Propagation delay Tr Rise time Tf Fall time
1.2 5.0 0.2 25 36 30
Io = -200mA Io = 200mA
No load Load = 1nF (*) Load = 1nF (*)
4.8 0.0 15 24 20
(*) Tr & Tf are measured among 10% and 90% of starting and final voltage.
2006/03/28 Ver.3
Page 4
SP6003
Synchronous Rectifier Driver
PERFORMANCE CHARACTERISTICS (TA=25, unless otherwise specified.)
Figure 1: Supply Current vs Supply Voltage 10 9 8 7 6 ID D 5 (m A) 4 3 2 1 0 3.3 3.5 3.7 4 4.2 4.4 4.6 4.9 5 5.3 5.5 5.7 6.1 V D D (V)
Figure 2: Output Rise Tim e vs Load Capacitor 70 60 50 Tim e 40 (ns) 30 20 10 0 220 330 470 680 1000 CLoad (pF) 1330 1680
20 18 16 14 12 ID D 10 (m A) 8 6 4 2 0 220 330 470 680 1000 1560 2200 2530 2880 CLoa d (pF) Figure 4: Supply Current vs Load Capacitor
Figure 5: Supply Current vs Freq. @ No Load 7 6 5 ID D 4 (m A) 3 2 1 0 20 50 81 154 184 256 327 380 425 484 554 Frequency (kHz)
Figure 3: Output Fall Tim e vs Load Capacitor 70 60 50 Tim e 40 (ns) 30 20 10 0 220 330 470 680 1000 1330 1680
20 18 16 14 12 IDD 10 (m A) 8 6 4 2 0
Figure 6: Supply Current vs Freq. @ Load=1nF
30
50
70
93
119 128 149 170 176
CLoad (pF)
Frequency (kHz)
*Fig. 2-4: Frequency = 85 kHz.
2006/03/28 Ver.3
Page 5
SP6003
Synchronous Rectifier Driver
SOP- 8 PACKAGE OUTLINE
2006/03/28 Ver.3
Page 6
SP6003
Synchronous Rectifier Driver
Information provided is alleged to be exact and consistent. SYNC Power Corporation presumes no responsibility for the penalties of use of such information or for any violation of patents or other rights of third parties, which may result from its use. No license is granted by allegation or otherwise under any patent or patent rights of SYNC Power Corporation. Conditions mentioned in this publication are subject to change without notice. This publication surpasses and replaces all information previously supplied. SYNC Power Corporation products are not authorized for use as critical components in life support devices or systems without express written approval of SYNC Power Corporation.
(c)The SYNC Power logo is a registered trademark of SYNC Power Corporation (c)2004 SYNC Power Corporation - Printed in Taiwan - All Rights Reserved SYNC Power Corporation 9F-5, No.3-2, Park Street NanKang District (NKSP), Taipei, Taiwan, 115, R.O.C Phone: 886-2-2655-8178 Fax: 886-2-2655-8468 http://www.syncpower.com
2006/03/28 Ver.3
Page 7


▲Up To Search▲   

 
Price & Availability of SP6003S8TG

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X